Market Na BIS »
Equipment
for the production of monolithic foam concrete

An example of insulation of an old flat roof with monolithic foam concrete D150 and D600


 
 
Watch our short videos
on the subject of equipment for insulating flat roofs with high-quality monolithic foam concrete:
   
 
Contact us from anywhere in the world through the most suitable messenger, ask questions regarding the purchase of equipment options for the production of monolithic foam concrete (we are located in the city of Krivoy Rog, Ukraine):
 
WhatsappViberTelegramMessengerInstagram
 
 
Watch us on social networks and subscribe to updates on information on equipment for the production of monolithic foam concrete:
 
 
 
 
This is us on the old building, which the new owners bought for a mall and are renovating. We were invited to insulate the old roof with our monolithic foam concrete, which is 50% more profitable in this case (when compared with insulation with basalt wool or extruded polystyrene foam).
 
 
 
Schematically, we will briefly show you the principle of insulation of this particular object. As a hydro-barrier for foam concrete, the customer decided to leave the old roofing material, which has not yet lost its integrity and will serve under the foam concrete for many more decades.
 
 
 
The length of the roof slope is 10 meters. The difference between the top and bottom points is 1.10 meters. That is, the slope of the roof is about 10 centimeters per meter (or almost 6 degrees). This means that this roof is not so flat.
 
 
 
The design engineer calculated that in order to achieve the necessary thermal insulation for the roof of this building, the thickness of the insulation with its thermal conductivity coefficient of 0.06 should be 20 - 25 centimeters.
 
 
 
So we installed hights 25 centimeters high (in this case, they are made of a galvanized profile).
 

  
 
And they poured one layer 20 centimeters thick with D150 foam concrete. And on top of it is a second, denser layer, 5 centimeters thick, with D600 foam concrete.
 


 
 
Following us, roofers will come to this object and carry out fusion of roofing material directly on our foam concrete (after it has dried). And we're moving to this lower level in a couple of days to insulate the old flat roof in the same way.
 


 
 
If you are interested in equipment for the production of high-quality monolithic foam concrete for thermal insulation of flat roofs - contact us. We produce equipment with the capacity and productivity you need. We can train you and accompany your activities, including equipment maintenance and supply of consumables.
 
 
 
Contact us from anywhere in the world through the most suitable messenger, ask questions regarding the purchase of equipment options for the production of monolithic foam concrete (we are located in the city of Krivoy Rog, Ukraine):
 
WhatsappViberTelegramMessengerInstagram
 
 
Watch us on social networks and subscribe to updates on information on equipment for the production of monolithic foam concrete:
 
 


Просмотров: 8